Description

Gigabit Ethernet Surge Suppressor 56V

Cambium Networks designs outdoor wireless broadband solutions to operate in the toughest of environments. Lightning strikes are the most typical cause of system outages or failures of mast-mounted equipment especially when mounted as high as 300m. The Surge Suppressor is critical for lightning protection to minimize the potential for damage. Network operators should always follow best-practices for grounding and lightning protection. Doing so will minimize network outages and reduce the associated costs of tower climbs and equipment repair/replacement.
The Gigabit Ethernet Surge Suppressor is compatible with the 450 and 450b (Subscriber Module), F180, F200 (other 30V Gigabit products). The unit ships suitable for mounting to a wall or pole.

FEATURES
Model Number- C000000L065A
Transfer Rate- 1000 Base T
Connectors- Two x RJ-45
Nominal Voltage- 30V
Protection Mode- Line-to-line and line-to-ground
Surge Arrestor- TVS Diodes (Transient Voltage Suppression for longer operational life)
Surge Current Rating, L-G, total- 216A, 10/1000us
Response time- 5 nanoseconds typical
Mounting- Pole mount or wall mount
Dimensions- 4.6 in. x 3.4 in. x 1.8 in.(118mm x 87.5mm x 46.5mm)
Weight- 0.34 lbs (156 gm)
Wind Survival- 200 mph (321 km/hour)
Operating Temperature- -40° F (-40° C) to +140° F (+60° C)
Humidity- 100% condensing
Environmental Protection- IP54 (Dust and Water Intrusion Protection)

Download Spec Sheet